DWS-4 TOOTH SETTER FOR BLADES

Smart tooth setting is an important condition for long-term and efficient use of the band saw.

DWS-4 tooth setter for blades

The purpose of tooth setting  - is a creation of a gap for the saw blade in the cut. Ideally, you need to find a balance, when reduced the friction between the tree and the saw. Then the saw extends cut without overheating.

The amount of setting depends on the species of wood. The softer and fibrous wood, the more divorced teeth to reduce friction on the fiber.

Soft woods have tough, long fibers, while the harder they are practically absent. The last also applies to frozen softwood, sawn with that little wiring.

The device is intended for manual tooth setting. Tooth width is from 10 to 60 mm and a thickness from 0.6 to 2 mm. Time of tooth setting of a saw blade 4m length is 22mm an is up to 10 minutes. The device is mounted on a table or on a footrest. The amount of tooth setting is controlled by a dial indicator with an accuracy of 0.01 mm.

Specification:

Value:

Saws width, mm

10 – 60

Saws thickness, mm

0.6 – 2 

Average setting time, min

10